Dobinsons Front Upper Control Arm Kit (UCA) - Toyota FJ Cruiser; 4Runner 2003-18; Lexus GX470, GX460
Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5" or more, due to the built-in 3 degrees of caster. This will fit 4th Gen 4Runners 2003-2009, 5th Gen 4Runners 2010-2018, Lexus GX470 2003-2009 and Lexus GX460 2010 to 2018 and all generations of Toyota FJ Cruiser (FJC).
NOTE: The ball joints are not installed, and must be installed by a professional using a heavy duty press. A hand press will not be strong enough.
These will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.
Complete kit for both left and right hand side, includes new ball joints (not assembled), OE style rubber frame bushings (installed), and washers
Has 3 degrees of caster built in, no adjustability or settings required
Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2") wall thickness, and powder coated black
Works for any lift height of 1.5" or more. Any height less than that, a proper wheel alignment may not be able to be achieved
Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life